AMSOIL OE 0W-16
AMSOIL OE 0W-16 is a 0W-16 engine oil (API SN PLUS). According to the manufacturer's data sheet it has a viscosity of 36.5 mm²/s at 40 °C, 7.2 mm²/s at 100 °C, a viscosity index of 164, HTHS of 2.38 mPa·s, a TBN of 8 mg KOH/g and a pour point of −48 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-16 i |
|---|---|---|
| Viscosity 40 °C | 36.5 mm²/s | 37 mm²/s |
| Viscosity 100 °C | 7.2 mm²/s | 7.3 mm²/s |
| Viscosity index | 164 | 163.5 |
| TBN | 8 mg KOH/g | 8 mg KOH/g |
| CCS −35 °C | 4781 mPa·s | 5065.5 mPa·s |
| Pour point | −48 °C | −43.5 °C |
| Flash point | 218 °C | 211.95 °C |
| Density | not stated | |
| HTHS 150 °C | 2.38 mPa·s | 2.4 mPa·s |
| Sulphated ash | not stated | |
| Noack volatility | 12.4 % |
All 0W-16 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN PLUS
- Oils by specification
Similar oils
Oils in the 0W-16 class with the closest parameters and the same specification.
- AMALIE Elixir Full Synthetic 0W-16API SQ · ILSAC GF-7B
- Valvoline Advanced Full Synthetic 0W-16API SP, SN Plus, RC · ILSAC GF-6B
- Amsoil Signature Series 0W-16API SQ, SP, SN Plus · ILSAC GF-7B, GF-6B
- Pennzoil Platinum 0W-16API SP · ILSAC GF-6B
- Castrol EDGE 0W-16 (US)API SP · ILSAC GF-6B
- Havoline ProDS Full Synthetic 0W-16API SN
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-16 class.
AMSOIL OE 0W-16 is a motor oil from Amsoil, viscosity grade 0W-16. In the database we compare it with 7 other oils in the 0W-16 class.
The oil meets API SN PLUS. API SN PLUS is the American petrol-engine specification with added LSPI protection.
Viscosity at 100 °C is 7.2 mm²/s, in the middle of the 6.1–8.2 mm²/s range for the summer grade 16.
Average values: viscosity index 164 is close to the class middle (median 164); CCS 4781 mPa·s is close to the class middle (median 4508); pour point −48 °C is close to the class middle (median −45).
Weaker values: HTHS 2.4 mPa·s is among the weakest in the class (median 2.4).
Limit values: HTHS 2.4 mPa·s meets the 2.3 mPa·s minimum required for this class; CCS 4781 mPa·s at −35 °C is 77 % of the SAE limit (6200 mPa·s).
The data sheet does not state sulphated ash, so we cannot compare it on this parameter.