Pennzoil Platinum 0W-16
Pennzoil Platinum 0W-16 is a 0W-16 engine oil (API SP · ILSAC GF-6B). According to the manufacturer's data sheet it has a viscosity of 35.6 mm²/s at 40 °C, 7.1 mm²/s at 100 °C, a viscosity index of 166 and a pour point of −51 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-16 i |
|---|---|---|
| Viscosity 40 °C | 35.6 mm²/s | 37 mm²/s |
| Viscosity 100 °C | 7.1 mm²/s | 7.3 mm²/s |
| Viscosity index | 166 | 163.5 |
| TBN | not stated | |
| CCS −35 °C | 4000 mPa·s | 5065.5 mPa·s |
| Pour point | −51 °C | −43.5 °C |
| Flash point | 204 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 211.95 °C |
| Density | 0.834 g/cm³ | 0.846 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 0W-16 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP · ILSAC GF-6B
- Oils by specification
Similar oils
Oils in the 0W-16 class with the closest parameters and the same specification.
- Castrol EDGE 0W-16 (US)API SP · ILSAC GF-6B
- Havoline ProDS Full Synthetic 0W-16API SN
- AMSOIL OE 0W-16API SN PLUS
- AMALIE Elixir Full Synthetic 0W-16API SQ · ILSAC GF-7B
- Valvoline Advanced Full Synthetic 0W-16API SP, SN Plus, RC · ILSAC GF-6B
- Amsoil Signature Series 0W-16API SQ, SP, SN Plus · ILSAC GF-7B, GF-6B
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-16 class.
Pennzoil Platinum 0W-16 is a motor oil from Pennzoil, viscosity grade 0W-16. In the database we compare it with 7 other oils in the 0W-16 class.
The oil meets API SP, ILSAC GF-6B. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI).
Viscosity at 100 °C is 7.1 mm²/s, in the middle of the 6.1–8.2 mm²/s range for the summer grade 16.
Strengths: CCS 4000 mPa·s is in the top quarter of the class (median 4508); pour point −51 °C is in the top quarter of the class (median −45).
Average values: viscosity index 166 is close to the class middle (median 164).
Limit values: CCS 4000 mPa·s at −35 °C is 65 % of the SAE limit (6200 mPa·s), giving a large cold-start reserve.
Based on its values it suits harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.