Havoline ProDS Full Synthetic 0W-16
Havoline ProDS Full Synthetic 0W-16 is a 0W-16 engine oil (API SN). According to the manufacturer's data sheet it has a viscosity of 42 mm²/s at 40 °C, 7.9 mm²/s at 100 °C, a viscosity index of 161 and a pour point of −36 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-16 i |
|---|---|---|
| Viscosity 40 °C | 42 mm²/s | 37 mm²/s |
| Viscosity 100 °C | 7.9 mm²/s | 7.3 mm²/s |
| Viscosity index | 161 | 163.5 |
| TBN | not stated | |
| CCS −35 °C | 5600 mPa·sThe data sheet labels CCS in poise, but the values correspond to mPa·s; we show them as mPa·s. | 5065.5 mPa·s |
| Pour point | −36 °C | −43.5 °C |
| Flash point | not stated | |
| Density | 0.85 g/cm³ | 0.846 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated | |
| Noack volatility | 12 % |
All 0W-16 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN
- Oils by specification
Similar oils
Oils in the 0W-16 class with the closest parameters and the same specification.
- Castrol EDGE 0W-16 (US)API SP · ILSAC GF-6B
- Pennzoil Platinum 0W-16API SP · ILSAC GF-6B
- Amsoil Signature Series 0W-16API SQ, SP, SN Plus · ILSAC GF-7B, GF-6B
- AMALIE Elixir Full Synthetic 0W-16API SQ · ILSAC GF-7B
- AMSOIL OE 0W-16API SN PLUS
- Valvoline Advanced Full Synthetic 0W-16API SP, SN Plus, RC · ILSAC GF-6B
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-16 class.
Havoline ProDS Full Synthetic 0W-16 is a motor oil from Texaco, viscosity grade 0W-16. In the database we compare it with 7 other oils in the 0W-16 class.
The oil meets API SN. API SN is an older American specification for petrol engines.
Viscosity at 100 °C is 7.9 mm²/s, near the upper end of the 6.1–8.2 mm²/s range for the summer grade 16. Within its class the oil is on the thick side, with more reserve at high temperatures.
Weaker values: viscosity index 161 is in the weaker half of the class (median 164); pour point −36 °C is among the weakest in the class (median −45).
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and sulphated ash, so we cannot compare it on these parameters.