AMSOIL XL 0W-20
AMSOIL XL 0W-20 is a 0W-20 engine oil (ACEA A1/B1 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 45.8 mm²/s at 40 °C, 8.7 mm²/s at 100 °C, a viscosity index of 171, HTHS of 2.74 mPa·s, a TBN of 10 mg KOH/g and a pour point of −48 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 45.8 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.7 mm²/s | 8.4 mm²/s |
| Viscosity index | 171 | 169 |
| TBN | 10 mg KOH/g | 8 mg KOH/g |
| CCS −35 °C | 6096 mPa·s | 5670 mPa·s |
| Pour point | −48 °C | −42.5 °C |
| Flash point | 210 °C | 225 °C |
| Density | not stated | |
| HTHS 150 °C | 2.74 mPa·s | 2.67 mPa·s |
| Sulphated ash | not stated | |
| Noack volatility | 11.8 % |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A1/B1 · API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- AMSOIL OE 0W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Pennzoil Platinum 0W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- Pennzoil Ultra Platinum 0W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Amsoil Signature Series 0W-20API SQ, SP, SN Plus · ILSAC GF-7A, GF-6A, GF-5
- Royal Purple High Performance 0W-20API SQ · ILSAC GF-7A
- Valvoline Advanced Full Synthetic 0W-20API SP · ILSAC GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
AMSOIL XL 0W-20 is a motor oil from Amsoil, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SP, ILSAC GF-6A, ACEA A1/B1, GM dexos1 Gen2 and more (8 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 8.7 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: HTHS 2.7 mPa·s is in the top quarter of the class (median 2.7); TBN 10 mg KOH/g is in the top quarter of the class (median 8).
Average values: viscosity index 171 is close to the class middle (median 169); pour point −48 °C is close to the class middle (median −44); Noack volatility 11.8 % is close to the class middle (median 11.8).
Weaker values: CCS 6096 mPa·s is among the weakest in the class (median 5670); flash point 210 °C is among the weakest in the class (median 227).
Limit values: HTHS 2.7 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 6096 mPa·s at −35 °C is 98 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve.
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state sulphated ash, so we cannot compare it on this parameter.