EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Pennzoil

Pennzoil Platinum 0W-20

Pennzoil Platinum 0W-20 is a 0W-20 engine oil (ACEA A1/B1 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 43.4 mm²/s at 40 °C, 8.6 mm²/s at 100 °C, a viscosity index of 182 and a pour point of −48 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C43.4 mm²/s44.145 mm²/s
Viscosity 100 °C8.6 mm²/s8.4 mm²/s
Viscosity index182 169
TBNnot stated
CCS −35 °C5670 mPa·s5670 mPa·s
Pour point−48 °C−42.5 °C
Flash point204 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.225 °C
Density0.836 g/cm³0.845 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A1/B1 · API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

Pennzoil Platinum 0W-20 is a motor oil from Pennzoil, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.

The oil meets API SP, ILSAC GF-6A, ACEA A1/B1, GM dexos1 Gen2 and more (6 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 8.6 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 182 is among the best 10 % in the class (median 169).

Average values: CCS 5670 mPa·s is close to the class middle (median 5670); pour point −48 °C is close to the class middle (median −44).

Limit values: CCS 5670 mPa·s at −35 °C is 91 % of the SAE limit (6200 mPa·s).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.