Pennzoil Ultra Platinum 0W-20
Pennzoil Ultra Platinum 0W-20 is a 0W-20 engine oil (ACEA A1/B1 · API SN PLUS · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 46.3 mm²/s at 40 °C, 8.8 mm²/s at 100 °C, a viscosity index of 172 and a pour point of −48 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 46.3 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.8 mm²/s | 8.4 mm²/s |
| Viscosity index | 172 | 169 |
| TBN | not stated | |
| CCS −35 °C | 5670 mPa·s | 5670 mPa·s |
| Pour point | −48 °C | −42.5 °C |
| Flash point | 208 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 225 °C |
| Density | 0.839 g/cm³ | 0.845 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- Pennzoil Platinum 0W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- AMSOIL XL 0W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- AMSOIL OE 0W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Castrol EDGE High Mileage 0W-20API SQ · ILSAC GF-7
- Castrol EDGE 0W-20 (US)API SQ · ILSAC GF-7
- Motorcraft 0W-20 Full SyntheticAPI SQ · ILSAC GF-7A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
Pennzoil Ultra Platinum 0W-20 is a motor oil from Pennzoil, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SN PLUS, ILSAC GF-5, ACEA A1/B1, Chrysler MS-6395 and more (5 in total). API SN PLUS is the American petrol-engine specification with added LSPI protection. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.8 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: viscosity index 172 is in the top quarter of the class (median 169).
Average values: CCS 5670 mPa·s is close to the class middle (median 5670); pour point −48 °C is close to the class middle (median −44).
Limit values: CCS 5670 mPa·s at −35 °C is 91 % of the SAE limit (6200 mPa·s).
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.