Havoline Synthetic Blend 5W-30
Havoline Synthetic Blend 5W-30 is a 5W-30 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 62.5 mm²/s at 40 °C, 10.3 mm²/s at 100 °C, a viscosity index of 154, a TBN of 8.7 mg KOH/g, a pour point of −40 °C and sulphated ash of 0.9 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 62.5 mm²/s | 61.2 mm²/s |
| Viscosity 100 °C | 10.3 mm²/s | 10.7 mm²/s |
| Viscosity index | 154 | 166 |
| TBN | 8.7 mg KOH/g | 8.6 mg KOH/g |
| CCS −30 °C | 6000 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s). | 4965 mPa·s |
| Pour point | −40 °C | −42 °C |
| Flash point | 200 °CThe manufacturer gives only a limit, "more than 200", not a measured value. | 230 °C |
| Density | 0.861 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | 0.9 % | 0.87 % |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN · ILSAC GF-5
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- Pennzoil Ultra Platinum 5W-30ACEA A1/B1, A5/B5 · API SN · ILSAC GF-5
- Castrol EDGE High Mileage 5W-30API SQ · ILSAC GF-7
- Castrol GTX Ultraclean 5W-30API SQ · ILSAC GF-7
- THRIVE dexos1 Gen3 Full Synthetic 5W-30API SP · ILSAC GF-6A
- Ford Motorcraft 5W-30 Full SyntheticAPI SN · ILSAC GF-5
- Pennzoil Full Synthetic 5W-30API SP · ILSAC GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
Havoline Synthetic Blend 5W-30 is a motor oil from Texaco, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.
The oil meets API SN, ILSAC GF-5, Chrysler MS-6395, Ford WSS-M2C946-A. API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 10.3 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.
Average values: TBN 8.7 mg KOH/g is close to the class middle (median 8.6).
Weaker values: viscosity index 154 is among the weakest in the class (median 166); pour point −40 °C is in the weaker half of the class (median −42).
Limit values: sulphated ash of 0.9 % is higher; the oil is not intended for engines with a DPF.
Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.