Castrol GTX Ultraclean 5W-30
Castrol GTX Ultraclean 5W-30 is a 5W-30 engine oil (API SQ · ILSAC GF-7). According to the manufacturer's data sheet it has a viscosity of 61 mm²/s at 40 °C, 10.2 mm²/s at 100 °C, a viscosity index of 148, a pour point of −38 °C and sulphated ash of 0.78 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 61 mm²/s | 61.2 mm²/s |
| Viscosity 100 °C | 10.2 mm²/s | 10.7 mm²/s |
| Viscosity index | 148 | 166 |
| TBN | not stated | |
| CCS −30 °C | 5845 mPa·s | 4965 mPa·s |
| Pour point | −38 °C | −42 °C |
| Flash point | 200 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 230 °C |
| Density | 0.857 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | 0.78 % | 0.87 % |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SQ · ILSAC GF-7
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- THRIVE dexos1 Gen3 Full Synthetic 5W-30API SP · ILSAC GF-6A
- Castrol GTX High Mileage 5W-30API SQ · ILSAC GF-7
- Pennzoil Ultra Platinum 5W-30ACEA A1/B1, A5/B5 · API SN · ILSAC GF-5
- Castrol EDGE High Mileage 5W-30API SQ · ILSAC GF-7
- Havoline Synthetic Blend 5W-30API SN · ILSAC GF-5
- AMALIE Elixir Full Synthetic dexos1 Gen3 5W-30API SQ, SP · ILSAC GF-7A, GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
Castrol GTX Ultraclean 5W-30 is a motor oil from Castrol, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.
The oil meets API SQ, ILSAC GF-7, Ford WSS-M2C946-A, Ford WSS-M2C946-B1 and more (6 in total). API SQ is the latest American specification for petrol engines, introduced in 2025. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 10.2 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.
Weaker values: viscosity index 148 is among the weakest in the class (median 166); CCS 5845 mPa·s is among the weakest in the class (median 4900); pour point −38 °C is among the weakest in the class (median −42).
Limit values: CCS 5845 mPa·s at −30 °C is 89 % of the SAE limit (6600 mPa·s); sulphated ash of 0.78 % is suitable for engines with a DPF.
Based on its values it suits engines with a DPF and everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.