THRIVE dexos1 Gen3 Full Synthetic 5W-30
THRIVE dexos1 Gen3 Full Synthetic 5W-30 is a 5W-30 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 60 mm²/s at 40 °C, 10.2 mm²/s at 100 °C, a viscosity index of 155, a TBN of 8 mg KOH/g and a pour point of −37 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 60 mm²/s | 61.2 mm²/s |
| Viscosity 100 °C | 10.2 mm²/s | 10.7 mm²/s |
| Viscosity index | 155 | 166 |
| TBN | 8 mg KOH/g | 8.6 mg KOH/g |
| CCS −30 °C | 4930 mPa·s | 4965 mPa·s |
| Pour point | −37 °C | −42 °C |
| Flash point | 213 °C | 230 °C |
| Density | 0.847 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated | |
| Noack volatility | 9.3 % |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- Castrol GTX Ultraclean 5W-30API SQ · ILSAC GF-7
- Castrol GTX High Mileage 5W-30API SQ · ILSAC GF-7
- Pennzoil Ultra Platinum 5W-30ACEA A1/B1, A5/B5 · API SN · ILSAC GF-5
- Castrol EDGE High Mileage 5W-30API SQ · ILSAC GF-7
- Havoline Synthetic Blend 5W-30API SN · ILSAC GF-5
- AMALIE Elixir Full Synthetic dexos1 Gen3 5W-30API SQ, SP · ILSAC GF-7A, GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
THRIVE dexos1 Gen3 Full Synthetic 5W-30 is a motor oil from THRIVE, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.
The oil meets API SP, ILSAC GF-6A, GM dexos1 Gen3, Chrysler MS-6395 and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 10.2 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.
Average values: CCS 4930 mPa·s is close to the class middle (median 4900); Noack volatility 9.3 % is close to the class middle (median 9.4).
Weaker values: viscosity index 155 is among the weakest in the class (median 166); TBN 8 mg KOH/g is in the weaker half of the class (median 8.6); pour point −37 °C is among the weakest in the class (median −42); flash point 213 °C is among the weakest in the class (median 232).
Limit values: CCS 4930 mPa·s at −30 °C is 75 % of the SAE limit (6600 mPa·s).
Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS and sulphated ash, so we cannot compare it on these parameters.