EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol 7705 O.E.M. 5W-40

Mannol 7705 O.E.M. 5W-40 is a 5W-40 engine oil (ACEA A3/B4 · API SN). According to the manufacturer's data sheet it has a viscosity of 72.2 mm²/s at 40 °C, 13.4 mm²/s at 100 °C, a viscosity index of 173, a TBN of 10.06 mg KOH/g and a pour point of −42 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 i
Viscosity 40 °C72.2 mm²/s86 mm²/s
Viscosity 100 °C13.4 mm²/s14.2 mm²/s
Viscosity index173 172
TBN10.06 mg KOH/g10.2 mg KOH/g
CCS −30 °C6100 mPa·s6200 mPa·s
Pour point−42 °C−42 °C
Flash point228 °C230 °C
Density0.85 g/cm³0.853 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A3/B4 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B4 allows at most 1.6 %.

All 5W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B4 · API SN
Oils by specification

Similar oils

Oils in the 5W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.

Mannol 7705 O.E.M. 5W-40 is a motor oil from Mannol, viscosity grade 5W-40. In the database we compare it with 69 other oils in the 5W-40 class.

The oil meets API SN, ACEA A3/B4, MB 229.3, Porsche A40 and more (10 in total). API SN is an older American specification for petrol engines. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. Renault RN0700 and RN0710 are Renault/Dacia approvals for petrol and older diesel engines.

Viscosity at 100 °C is 13.4 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Average values: viscosity index 173 is close to the class middle (median 172); CCS 6100 mPa·s is close to the class middle (median 6160); pour point −42 °C is close to the class middle (median −42); flash point 228 °C is close to the class middle (median 230).

Weaker values: TBN 10.1 mg KOH/g is in the weaker half of the class (median 10.1).

Limit values: CCS 6100 mPa·s at −30 °C is 92 % of the SAE limit (6600 mPa·s).

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.