MANNOL Elite 5W-40
MANNOL Elite 5W-40 is a 5W-40 engine oil (ACEA A3/B4 · API SN/CH-4). According to the manufacturer's data sheet it has a viscosity of 80.5 mm²/s at 40 °C, 13.5 mm²/s at 100 °C, a viscosity index of 171 and a pour point of −42 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-40 i |
|---|---|---|
| Viscosity 40 °C | 80.5 mm²/s | 86 mm²/s |
| Viscosity 100 °C | 13.5 mm²/s | 14.2 mm²/s |
| Viscosity index | 171 | 172 |
| TBN | 10.56 mg KOH/gValue taken from a different (older or regional) data sheet of the manufacturer. | 10.2 mg KOH/g |
| CCS −30 °C | 5250 mPa·sValue taken from a different (older or regional) data sheet of the manufacturer. | 6200 mPa·s |
| Pour point | −42 °C | −42 °C |
| Flash point | 234 °C | 230 °C |
| Density | 0.85 g/cm³Value taken from a different (older or regional) data sheet of the manufacturer. | 0.853 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA A3/B4 requires at least 3.5 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A3/B4 allows at most 1.6 %. |
All 5W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A3/B4 · API SN/CH-4
- Approvals and recommendations
- MB 229.5, 229.3; VW 502.00/505.00; BMW LL-01, LL-98; Porsche A40; PSA B71 2296; Renault RN0700/RN0710; Fiat 9.55535-H2, -Z2; Chrysler MS-10850, MS-10896, MS-12991; GM LL-A-025, LL-B-025
- Oils by specification
Similar oils
Oils in the 5W-40 class with the closest parameters and the same specification.
- MANNOL Diesel Turbo 5W-40ACEA A3/B4 · API SN/CI-4
- MANNOL 7711 O.E.M. 5W-40ACEA A3/B4 · API SN
- Mannol 7705 O.E.M. 5W-40ACEA A3/B4 · API SN
- Fanfaro 5W-40 VSXACEA A3/B4 · API SN/CH-4
- MANNOL EXTREME 5W-40ACEA A3/B4 · API SN/CH-4
- MOBIL SUPER 3000 X1 5W-40ACEA A3/B4 · API SL, SM, SN, SQ (meets); CF
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.
MANNOL Elite 5W-40 is a motor oil from Mannol, viscosity grade 5W-40. In the database we compare it with 69 other oils in the 5W-40 class.
The oil meets ACEA A3/B4, API SN, API CH-4, MB 229.5 and more (18 in total). ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. API SN is an older American specification for petrol engines. MB 229.5 is the Mercedes-Benz approval for engines without a DPF with extended intervals. Renault RN0700 and RN0710 are Renault/Dacia approvals for petrol and older diesel engines.
Viscosity at 100 °C is 13.5 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.
Average values: viscosity index 171 is close to the class middle (median 172); pour point −42 °C is close to the class middle (median −42); flash point 234 °C is close to the class middle (median 230).
Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.