Mannol 7717 O.E.M. 0W-30
Mannol 7717 O.E.M. 0W-30 is a 0W-30 engine oil (ACEA C2, C3 · API SN, CF). According to the manufacturer's data sheet it has a viscosity of 65.2 mm²/s at 40 °C, 11.83 mm²/s at 100 °C, a viscosity index of 179, a TBN of 8.51 mg KOH/g and a pour point of −47 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-30 i |
|---|---|---|
| Viscosity 40 °C | 65.2 mm²/s | 58 mm²/s |
| Viscosity 100 °C | 11.83 mm²/s | 10.4 mm²/s |
| Viscosity index | 179 | 181 |
| TBN | 8.51 mg KOH/g | 8.4 mg KOH/g |
| CCS −35 °C | 6150 mPa·s | 5890 mPa·s |
| Pour point | −47 °C | −48 °C |
| Flash point | 224 °C | 226 °C |
| Density | 0.83 g/cm³ | 0.843 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %. |
All 0W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
Similar oils
Oils in the 0W-30 class with the closest parameters and the same specification.
- Shell Helix Ultra ECT C2/C3 0W-30ACEA C2, C3 · API SN
- Castrol EDGE 0W-30 (C2/C3)ACEA C2, C3 · API SP
- Total Quartz INEO First 0W-30ACEA C2 · API SN
- Bardahl XTEC 0W-30 (C2)ACEA C2
- IGOL Process C2 0W-30ACEA C2 · API SP
- Valvoline SynPower ENV C2 0W-30ACEA C2
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-30 class.
Mannol 7717 O.E.M. 0W-30 is a motor oil from Mannol, viscosity grade 0W-30. In the database we compare it with 47 other oils in the 0W-30 class.
The oil meets API SN, API CF, ACEA C2, ACEA C3 and more (13 in total). API SN is an older American specification for petrol engines. ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. VW 504 00 / 507 00 are VW Group approvals for engines with extended LongLife service intervals. MB 229.51 is the Mercedes-Benz approval for engines with a DPF.
Viscosity at 100 °C is 11.83 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 179 is close to the class middle (median 181); TBN 8.5 mg KOH/g is close to the class middle (median 8.4); pour point −47 °C is close to the class middle (median −48).
Weaker values: CCS 6150 mPa·s is among the weakest in the class (median 5840); flash point 224 °C is in the weaker half of the class (median 230).
Limit values: CCS 6150 mPa·s at −35 °C is 99 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve.
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.