EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Shell

Shell Helix Ultra ECT C2/C3 0W-30

Shell Helix Ultra ECT C2/C3 0W-30 is a 0W-30 engine oil (ACEA C2, C3 · API SN). According to the manufacturer's data sheet it has a viscosity of 58.7 mm²/s at 40 °C, 11.9 mm²/s at 100 °C, a viscosity index of 204 and a pour point of −51 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-30 i
Viscosity 40 °C58.7 mm²/s58 mm²/s
Viscosity 100 °C11.9 mm²/s10.4 mm²/s
Viscosity index204 181
TBNnot stated
CCS −35 °Cnot stated
Pour point−51 °C−48 °C
Flash point226 °C226 °C
Density0.838 g/cm³0.843 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %.

All 0W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C2, C3 · API SN
Oils by specification

Similar oils

Oils in the 0W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-30 class.

Shell Helix Ultra ECT C2/C3 0W-30 is a motor oil from Shell, viscosity grade 0W-30. In the database we compare it with 47 other oils in the 0W-30 class.

The oil meets ACEA C2, ACEA C3, API SN, VW 504 00 and more (11 in total). ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. API SN is an older American specification for petrol engines. VW 504 00 / 507 00 are VW Group approvals for engines with extended LongLife service intervals. MB 229.51 is the Mercedes-Benz approval for engines with a DPF.

Viscosity at 100 °C is 11.9 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 204 is among the best 10 % in the class (median 181).

Average values: pour point −51 °C is close to the class middle (median −48).

Weaker values: flash point 226 °C is in the weaker half of the class (median 230).

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.