EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol Legend + Ester 0W-40

Mannol Legend + Ester 0W-40 is a 0W-40 engine oil (ACEA A3/B4 · API SN/CH-4). According to the manufacturer's data sheet it has a viscosity of 68.2 mm²/s at 40 °C, 12.55 mm²/s at 100 °C, a viscosity index of 185, a TBN of 10.16 mg KOH/g and a pour point of −48 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-40 i
Viscosity 40 °C68.2 mm²/s75.7 mm²/s
Viscosity 100 °C12.55 mm²/s13.35 mm²/s
Viscosity index185 181
TBN10.16 mg KOH/g10.1 mg KOH/g
CCS −35 °C6120 mPa·s5950 mPa·s
Pour point−48 °C−48 °C
Flash point224 °C226 °C
Density0.83 g/cm³0.844 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A3/B4 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B4 allows at most 1.6 %.

All 0W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B4 · API SN/CH-4
Approvals and recommendations
approvals: BMW LL-04; VW 502 00 / 505 00; MB 229.5, 229.3; Porsche A40; Renault RN0700 / RN0710; GM LL-A-025, LL-B-025; recommended: Fiat 9.55535-M2; Ford WSS-M2C937-A; Chrysler MS-10725, MS-12633
Oils by specification

Similar oils

Oils in the 0W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-40 class.

Mannol Legend + Ester 0W-40 is a motor oil from Mannol, viscosity grade 0W-40. In the database we compare it with 43 other oils in the 0W-40 class.

The oil meets API SN, API CH-4, ACEA A3/B4, BMW LL-04 and more (17 in total). API SN is an older American specification for petrol engines. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. MB 229.5 is the Mercedes-Benz approval for engines without a DPF with extended intervals. Renault RN0700 and RN0710 are Renault/Dacia approvals for petrol and older diesel engines.

Viscosity at 100 °C is 12.55 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Strengths: viscosity index 185 is in the top quarter of the class (median 182).

Average values: TBN 10.2 mg KOH/g is close to the class middle (median 10.1); pour point −48 °C is close to the class middle (median −48).

Weaker values: CCS 6120 mPa·s is among the weakest in the class (median 5925); flash point 224 °C is in the weaker half of the class (median 228).

Limit values: CCS 6120 mPa·s at −35 °C is 99 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve.

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.