EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Performance Plus

Performance Plus Full Synthetic dexos1 Gen3 5W-30

Performance Plus Full Synthetic dexos1 Gen3 5W-30 is a 5W-30 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 62.6 mm²/s at 40 °C, 11.1 mm²/s at 100 °C, a viscosity index of 171, a pour point of −42 °C and sulphated ash of 0.8 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C62.6 mm²/s61.2 mm²/s
Viscosity 100 °C11.1 mm²/s10.7 mm²/s
Viscosity index171 166
TBNnot stated
CCS −30 °C3600 mPa·s4965 mPa·s
Pour point−42 °C−42 °C
Flash point228 °C230 °C
Density0.847 g/cm³0.851 g/cm³
HTHS 150 °Cnot stated
Sulphated ash0.8 %0.87 %

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Performance Plus Full Synthetic dexos1 Gen3 5W-30 is a motor oil from Performance Plus, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SP, ILSAC GF-6A, GM dexos1 Gen3, Ford WSS-M2C946-B1 and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 11.1 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: viscosity index 171 is in the top quarter of the class (median 166); CCS 3600 mPa·s is among the best 10 % in the class (median 4900).

Average values: pour point −42 °C is close to the class middle (median −42).

Weaker values: flash point 228 °C is in the weaker half of the class (median 232).

Limit values: CCS 3600 mPa·s at −30 °C is 55 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve; sulphated ash of 0.8 % is suitable for engines with a DPF.

Based on its values it suits engines with a DPF and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.