EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Royal Purple

Royal Purple HMX High Mileage 5W-30

Royal Purple HMX High Mileage 5W-30 is a 5W-30 engine oil (API SP). According to the manufacturer's data sheet it has a viscosity of 62.8 mm²/s at 40 °C, 10.9 mm²/s at 100 °C, a viscosity index of 166, HTHS of 3.3 mPa·s, a TBN of 8.9 mg KOH/g and a pour point of −45 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C62.8 mm²/s61.2 mm²/s
Viscosity 100 °C10.9 mm²/s10.7 mm²/s
Viscosity index166 166
TBN8.9 mg KOH/g8.6 mg KOH/g
CCS −30 °C4888 mPa·s4965 mPa·s
Pour point−45 °C−42 °C
Flash point230 °C230 °C
Densitynot stated
HTHS 150 °C3.3 mPa·s3.2 mPa·s
Sulphated ashnot stated

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Royal Purple HMX High Mileage 5W-30 is a motor oil from Royal Purple, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SP, Chrysler MS-6395, Ford WSS-M2C961-A1, Ford WSS-M2C946-A and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 10.9 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: pour point −45 °C is in the top quarter of the class (median −42).

Average values: viscosity index 166 is close to the class middle (median 166); HTHS 3.3 mPa·s is close to the class middle (median 3.2); TBN 8.9 mg KOH/g is close to the class middle (median 8.6); CCS 4888 mPa·s is close to the class middle (median 4900).

Weaker values: flash point 230 °C is in the weaker half of the class (median 232).

Limit values: HTHS 3.3 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 4888 mPa·s at −30 °C is 74 % of the SAE limit (6600 mPa·s).

The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.