AMSOIL OE 5W-30
AMSOIL OE 5W-30 is a 5W-30 engine oil (ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 63.4 mm²/s at 40 °C, 11 mm²/s at 100 °C, a viscosity index of 168, HTHS of 3.3 mPa·s, a TBN of 8 mg KOH/g and a pour point of −44 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 63.4 mm²/s | 61.2 mm²/s |
| Viscosity 100 °C | 11 mm²/s | 10.7 mm²/s |
| Viscosity index | 168 | 166 |
| TBN | 8 mg KOH/g | 8.6 mg KOH/g |
| CCS −30 °C | 4555 mPa·s | 4965 mPa·s |
| Pour point | −44 °C | −42 °C |
| Flash point | 220 °C | 230 °C |
| Density | not stated | |
| HTHS 150 °C | 3.3 mPa·s | 3.2 mPa·s |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A5/B5 allows at most 1.6 %. | |
| Noack volatility | 9.4 % |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- AMSOIL XL 5W-30ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
- Pennzoil Ultra Platinum 5W-30ACEA A1/B1, A5/B5 · API SN · ILSAC GF-5
- Pennzoil Platinum 5W-30ACEA A1/B1 · API SP · ILSAC GF-6A
- Royal Purple HMX High Mileage 5W-30API SP
- Valvoline High Mileage MaxLife 5W-30API SP · ILSAC GF-6A
- PennGrade 1 High Performance 5W-30
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
AMSOIL OE 5W-30 is a motor oil from Amsoil, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.
The oil meets API SP, ILSAC GF-6A, ACEA A1/B1, ACEA A5/B5 and more (10 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 11 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.
Strengths: pour point −44 °C is in the top quarter of the class (median −42).
Average values: viscosity index 168 is close to the class middle (median 166); HTHS 3.3 mPa·s is close to the class middle (median 3.2); CCS 4555 mPa·s is close to the class middle (median 4900); Noack volatility 9.4 % is close to the class middle (median 9.4).
Weaker values: TBN 8 mg KOH/g is in the weaker half of the class (median 8.6); flash point 220 °C is among the weakest in the class (median 232).
Limit values: HTHS 3.3 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 4555 mPa·s at −30 °C is 69 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.
Based on its values it suits harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state sulphated ash, so we cannot compare it on this parameter.