EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Amsoil

AMSOIL XL 5W-30

AMSOIL XL 5W-30 is a 5W-30 engine oil (ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 62.9 mm²/s at 40 °C, 11.1 mm²/s at 100 °C, a viscosity index of 169, HTHS of 3.3 mPa·s, a TBN of 10 mg KOH/g and a pour point of −44 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C62.9 mm²/s61.2 mm²/s
Viscosity 100 °C11.1 mm²/s10.7 mm²/s
Viscosity index169 166
TBN10 mg KOH/g8.6 mg KOH/g
CCS −30 °C4619 mPa·s4965 mPa·s
Pour point−44 °C−42 °C
Flash point214 °C230 °C
Densitynot stated
HTHS 150 °C3.3 mPa·s3.2 mPa·s
Sulphated ashnot statedNot stated by the manufacturer. ACEA A5/B5 allows at most 1.6 %.
Noack volatility9.5 %

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

AMSOIL XL 5W-30 is a motor oil from Amsoil, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SP, ILSAC GF-6A, ACEA A1/B1, ACEA A5/B5 and more (11 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 11.1 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: TBN 10 mg KOH/g is in the top quarter of the class (median 8.6); pour point −44 °C is in the top quarter of the class (median −42).

Average values: viscosity index 169 is close to the class middle (median 166); HTHS 3.3 mPa·s is close to the class middle (median 3.2); CCS 4619 mPa·s is close to the class middle (median 4900).

Weaker values: flash point 214 °C is among the weakest in the class (median 232); Noack volatility 9.5 % is in the weaker half of the class (median 9.4).

Limit values: HTHS 3.3 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 4619 mPa·s at −30 °C is 70 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.

Based on its values it suits harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state sulphated ash, so we cannot compare it on this parameter.