EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Wolf

WOLF Essential SN/CF 5W-40

WOLF Essential SN/CF 5W-40 is a 5W-40 engine oil (ACEA A3/B3, A3/B4 · API SN, CF). According to the manufacturer's data sheet it has a viscosity of 80 mm²/s at 40 °C, 13.8 mm²/s at 100 °C, a viscosity index of 178, a TBN of 10.1 mg KOH/g, a pour point of −42 °C and sulphated ash of 1.1 %.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 i
Viscosity 40 °C80 mm²/s86 mm²/s
Viscosity 100 °C13.8 mm²/s14.2 mm²/s
Viscosity index178 172
TBN10.1 mg KOH/g10.2 mg KOH/g
CCS −30 °Cnot stated
Pour point−42 °C−42 °C
Flash point222 °C230 °C
Density0.852 g/cm³0.853 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A3/B3 requires at least 3.5 mPa·s.
Sulphated ash1.1 %1.23 %

All 5W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B3, A3/B4 · API SN, CF
Oils by specification

Similar oils

Oils in the 5W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.

WOLF Essential SN/CF 5W-40 is a motor oil from Wolf, viscosity grade 5W-40. In the database we compare it with 69 other oils in the 5W-40 class.

The oil meets ACEA A3/B3, ACEA A3/B4, API SN, API CF and more (7 in total). ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. API SN is an older American specification for petrol engines.

Viscosity at 100 °C is 13.8 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: viscosity index 178 is among the best 10 % in the class (median 172).

Average values: TBN 10.1 mg KOH/g is close to the class middle (median 10.1); pour point −42 °C is close to the class middle (median −42).

Weaker values: flash point 222 °C is in the weaker half of the class (median 230).

Limit values: sulphated ash of 1.1 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.