EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Castrol

Castrol GTX MAGNATEC 5W-30

Castrol GTX MAGNATEC 5W-30 is a 5W-30 engine oil (API SP · ILSAC GF-6). According to the manufacturer's data sheet it has a viscosity of 64 mm²/s at 40 °C, 11.2 mm²/s at 100 °C, a viscosity index of 170, a pour point of −42 °C and sulphated ash of 0.83 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C64 mm²/s61.2 mm²/s
Viscosity 100 °C11.2 mm²/s10.7 mm²/s
Viscosity index170 166
TBNnot stated
CCS −30 °C4000 mPa·s4965 mPa·s
Pour point−42 °C−42 °C
Flash point210 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.230 °C
Density0.847 g/cm³0.851 g/cm³
HTHS 150 °Cnot stated
Sulphated ash0.83 %0.87 %

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP · ILSAC GF-6
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Castrol GTX MAGNATEC 5W-30 is a motor oil from Castrol, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SP, ILSAC GF-6, GM dexos1 Gen3, Ford WSS-M2C946-A and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). GM dexos1 is the General Motors licence for petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 11.2 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: viscosity index 170 is in the top quarter of the class (median 166); CCS 4000 mPa·s is in the top quarter of the class (median 4900).

Average values: pour point −42 °C is close to the class middle (median −42).

Limit values: CCS 4000 mPa·s at −30 °C is 61 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve; sulphated ash of 0.83 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.