EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Kendall

Kendall GT-1 Full Synthetic 0W-20

Kendall GT-1 Full Synthetic 0W-20 is a 0W-20 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 43.9 mm²/s at 40 °C, 8.4 mm²/s at 100 °C, a viscosity index of 171, HTHS of 2.6 mPa·s, a TBN of 8 mg KOH/g, a pour point of −43 °C and sulphated ash of 0.96 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C43.9 mm²/s44.145 mm²/s
Viscosity 100 °C8.4 mm²/s8.4 mm²/s
Viscosity index171 169
TBN8 mg KOH/g8 mg KOH/g
CCS −35 °C5000 mPa·s5670 mPa·s
Pour point−43 °C−42.5 °C
Flash point229 °C225 °C
Density0.847 g/cm³0.845 g/cm³
HTHS 150 °C2.6 mPa·s2.67 mPa·s
Sulphated ash0.96 %0.79 %

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SN · ILSAC GF-5
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

Kendall GT-1 Full Synthetic 0W-20 is a motor oil from Kendall, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.

The oil meets API SN, ILSAC GF-5. API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines.

Viscosity at 100 °C is 8.4 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.

Strengths: CCS 5000 mPa·s is in the top quarter of the class (median 5670).

Average values: viscosity index 171 is close to the class middle (median 169); TBN 8 mg KOH/g is close to the class middle (median 8); pour point −43 °C is close to the class middle (median −44); flash point 229 °C is close to the class middle (median 227).

Weaker values: HTHS 2.6 mPa·s is in the weaker half of the class (median 2.7).

Limit values: HTHS 2.6 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 5000 mPa·s at −35 °C is 81 % of the SAE limit (6200 mPa·s); sulphated ash of 0.96 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.