EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Schaeffer

Schaeffer Supreme 9000 Full Synthetic 0W-20

Schaeffer Supreme 9000 Full Synthetic 0W-20 is a 0W-20 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 42.37 mm²/s at 40 °C, 8.37 mm²/s at 100 °C, a viscosity index of 174, HTHS of 2.71 mPa·s, a TBN of 7.84 mg KOH/g, a pour point of −51 °C and sulphated ash of 0.82 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C42.37 mm²/s44.145 mm²/s
Viscosity 100 °C8.37 mm²/s8.4 mm²/s
Viscosity index174 169
TBN7.84 mg KOH/g8 mg KOH/g
CCS −35 °C5826 mPa·s5670 mPa·s
Pour point−51 °C−42.5 °C
Flash point204 °C225 °C
Density0.848 g/cm³0.845 g/cm³
HTHS 150 °C2.71 mPa·s2.67 mPa·s
Sulphated ash0.82 %0.79 %
Noack volatility12.58 %

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

Schaeffer Supreme 9000 Full Synthetic 0W-20 is a motor oil from Schaeffer, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.

The oil meets API SP, ILSAC GF-6A, GM dexos1 Gen2, Chrysler MS-6395 and more (7 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 8.37 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.

Strengths: viscosity index 174 is in the top quarter of the class (median 169); HTHS 2.7 mPa·s is in the top quarter of the class (median 2.7); pour point −51 °C is in the top quarter of the class (median −44).

Weaker values: TBN 7.8 mg KOH/g is in the weaker half of the class (median 8); CCS 5826 mPa·s is in the weaker half of the class (median 5670); flash point 204 °C is among the weakest in the class (median 227); Noack volatility 12.6 % is among the weakest in the class (median 11.8).

Limit values: HTHS 2.7 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 5826 mPa·s at −35 °C is 94 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve; sulphated ash of 0.82 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.