Royal Purple HMX High Mileage 0W-20
Royal Purple HMX High Mileage 0W-20 is a 0W-20 engine oil (API SP). According to the manufacturer's data sheet it has a viscosity of 43.3 mm²/s at 40 °C, 8.4 mm²/s at 100 °C, a viscosity index of 173, HTHS of 2.6 mPa·s, a TBN of 7.8 mg KOH/g and a pour point of −44 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 43.3 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.4 mm²/s | 8.4 mm²/s |
| Viscosity index | 173 | 169 |
| TBN | 7.8 mg KOH/g | 8 mg KOH/g |
| CCS −35 °C | 4700 mPa·s | 5670 mPa·s |
| Pour point | −44 °C | −42.5 °C |
| Flash point | 219 °C | 225 °C |
| Density | not stated | |
| HTHS 150 °C | 2.6 mPa·s | 2.67 mPa·s |
| Sulphated ash | not stated |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- Kendall GT-1 Full Synthetic 0W-20API SN · ILSAC GF-5
- Mighty Engine Guard dexos1 Gen3 0W-20API SP · ILSAC GF-6A
- Valvoline Advanced Full Synthetic 0W-20API SP · ILSAC GF-6A
- Valvoline Extended Protection 0W-20API SP · ILSAC GF-6A
- Schaeffer Supreme 9000 Full Synthetic 0W-20API SP · ILSAC GF-6A
- Royal Purple High Performance 0W-20API SQ · ILSAC GF-7A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
Royal Purple HMX High Mileage 0W-20 is a motor oil from Royal Purple, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SP, Chrysler MS-6395, Ford WSS-M2C962-A1, Ford WSS-M2C947-A. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.4 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Strengths: viscosity index 173 is in the top quarter of the class (median 169); CCS 4700 mPa·s is among the best 10 % in the class (median 5670).
Average values: pour point −44 °C is close to the class middle (median −44).
Weaker values: HTHS 2.6 mPa·s is in the weaker half of the class (median 2.7); TBN 7.8 mg KOH/g is among the weakest in the class (median 8); flash point 219 °C is in the weaker half of the class (median 227).
Limit values: HTHS 2.6 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 4700 mPa·s at −35 °C is 76 % of the SAE limit (6200 mPa·s).
The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.