EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Valvoline

Valvoline Extended Protection 0W-20

Valvoline Extended Protection 0W-20 is a 0W-20 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 44 mm²/s at 40 °C, 8.4 mm²/s at 100 °C, a viscosity index of 171 and HTHS of 2.7 mPa·s.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C44 mm²/s44.145 mm²/s
Viscosity 100 °C8.4 mm²/s8.4 mm²/s
Viscosity index171 169
TBNnot stated
CCS −35 °C6000 mPa·sThe manufacturer gives only a limit, "less than 6000", not a measured value.5670 mPa·s
Pour point−39 °CThe manufacturer gives only a limit, "at most −39", not a measured value.−42.5 °C
Flash pointnot stated
Density0.844 g/cm³0.845 g/cm³
HTHS 150 °C2.7 mPa·s2.67 mPa·s
Sulphated ashnot stated

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

Valvoline Extended Protection 0W-20 is a motor oil from Valvoline, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.

The oil meets API SP, ILSAC GF-6A, GM dexos1 Gen2, Ford WSS-M2C962-A1 and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 8.4 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.

Average values: viscosity index 171 is close to the class middle (median 169); HTHS 2.7 mPa·s is close to the class middle (median 2.7).

Limit values: HTHS 2.7 mPa·s meets the 2.6 mPa·s minimum required for this class.

The data sheet does not state TBN, Noack volatility and sulphated ash, so we cannot compare it on these parameters.