EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Kendall

Kendall Super-D 3 15W-40

Kendall Super-D 3 15W-40 is a 15W-40 engine oil (ACEA E7 · API CI-4, SL). According to the manufacturer's data sheet it has a viscosity of 116 mm²/s at 40 °C, 15.3 mm²/s at 100 °C, a viscosity index of 138, HTHS of 4.3 mPa·s, a TBN of 11.8 mg KOH/g, a pour point of −40 °C and sulphated ash of 1.5 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C116 mm²/s114.44 mm²/s
Viscosity 100 °C15.3 mm²/s15.2 mm²/s
Viscosity index138 138
TBN11.8 mg KOH/g10.05 mg KOH/g
CCS −20 °C6400 mPa·s6200 mPa·s
Pour point−40 °C−37 °C
Flash point240 °C230 °C
Density0.881 g/cm³0.875 g/cm³
HTHS 150 °C4.3 mPa·s4.26 mPa·s
Sulphated ash1.5 %1 %

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7 · API CI-4, SL
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

Kendall Super-D 3 15W-40 is a motor oil from Kendall, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.

The oil meets API CI-4, API SL, ACEA E7, Cat ECF-2 and more (11 in total). ACEA E7 is the European specification for heavy-duty diesel engines without a DPF.

Viscosity at 100 °C is 15.3 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: TBN 11.8 mg KOH/g is among the best 10 % in the class (median 10.1); flash point 240 °C is in the top quarter of the class (median 232).

Average values: viscosity index 138 is close to the class middle (median 138); HTHS 4.3 mPa·s is close to the class middle (median 4.3); pour point −40 °C is close to the class middle (median −37).

Weaker values: CCS 6400 mPa·s is among the weakest in the class (median 6050).

Limit values: HTHS 4.3 mPa·s meets the 3.7 mPa·s minimum required for this class; CCS 6400 mPa·s at −20 °C is 91 % of the SAE limit (7000 mPa·s); sulphated ash of 1.5 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF and higher loads, towing or high-mileage engines. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.