EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mobil

Mobil Delvac 1300 Super 15W-40

Mobil Delvac 1300 Super 15W-40 is a 15W-40 engine oil (ACEA E7, E11 · API CK-4, CJ-4, CI-4, SP · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 109 mm²/s at 40 °C, 14 mm²/s at 100 °C, HTHS of 4 mPa·s, a TBN of 9.4 mg KOH/g, a pour point of −33 °C and sulphated ash of 0.9 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C109 mm²/s114.44 mm²/s
Viscosity 100 °C14 mm²/s15.2 mm²/s
Viscosity indexnot stated
TBN9.4 mg KOH/g10.05 mg KOH/g
CCS −20 °Cnot stated
Pour point−33 °C−37 °C
Flash point225 °C230 °C
Density0.875 g/cm³0.875 g/cm³
HTHS 150 °C4 mPa·s4.26 mPa·s
Sulphated ash0.9 %1 %

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7, E11 · API CK-4, CJ-4, CI-4, SP · JASO DH-2
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

Mobil Delvac 1300 Super 15W-40 is a motor oil from Mobil, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.

The oil meets API CK-4, API CJ-4, API CI-4, API SP and more (15 in total). API CK-4 is the current American specification for truck and pickup diesel engines. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups.

Viscosity at 100 °C is 14 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Weaker values: HTHS 4 mPa·s is among the weakest in the class (median 4.3); TBN 9.4 mg KOH/g is among the weakest in the class (median 10.1); pour point −33 °C is among the weakest in the class (median −37); flash point 225 °C is among the weakest in the class (median 232).

Limit values: HTHS 4 mPa·s meets the 3.7 mPa·s minimum required for this class; sulphated ash of 0.9 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.