EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Schaeffer

Schaeffer 700 SynShield Durability Advantage 15W-40

Schaeffer 700 SynShield Durability Advantage 15W-40 is a 15W-40 engine oil (ACEA E7, E11 · API CK-4, CJ-4, CI-4 · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 114.44 mm²/s at 40 °C, 15.95 mm²/s at 100 °C, a viscosity index of 149, HTHS of 4.3 mPa·s, a TBN of 10.2 mg KOH/g and a pour point of −44 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C114.44 mm²/s114.44 mm²/s
Viscosity 100 °C15.95 mm²/s15.2 mm²/s
Viscosity index149 138
TBN10.2 mg KOH/g10.05 mg KOH/g
CCS −20 °C4124 mPa·s6200 mPa·s
Pour point−44 °C−37 °C
Flash point243 °C230 °C
Density0.867 g/cm³0.875 g/cm³
HTHS 150 °C4.3 mPa·s4.26 mPa·s
Sulphated ash1 %The manufacturer gives only a limit, "less than 1", not a measured value.1 %
Noack volatility8 %

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7, E11 · API CK-4, CJ-4, CI-4 · JASO DH-2
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

Schaeffer 700 SynShield Durability Advantage 15W-40 is a motor oil from Schaeffer, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.

The oil meets API CK-4, API CJ-4, API CI-4, ACEA E7 and more (22 in total). API CK-4 is the current American specification for truck and pickup diesel engines. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 15.95 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 149 is among the best 10 % in the class (median 138); CCS 4124 mPa·s is in the top quarter of the class (median 6050); pour point −44 °C is in the top quarter of the class (median −37); flash point 243 °C is among the best 10 % in the class (median 232).

Average values: HTHS 4.3 mPa·s is close to the class middle (median 4.3); TBN 10.2 mg KOH/g is close to the class middle (median 10.1); Noack volatility 8 % is close to the class middle (median 11).

Limit values: HTHS 4.3 mPa·s meets the 3.7 mPa·s minimum required for this class; CCS 4124 mPa·s at −20 °C is 59 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve.

Based on its values it suits higher loads, towing or high-mileage engines and harsh winters with easy starting. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.