EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · John Deere

John Deere Plus-50 II 15W-40

John Deere Plus-50 II 15W-40 is a 15W-40 engine oil (ACEA E7, E9 · API CK-4, CJ-4, CI-4, SN). According to the manufacturer's data sheet it has a viscosity of 128 mm²/s at 40 °C, 15.6 mm²/s at 100 °C, a viscosity index of 127, HTHS of 4.3 mPa·s, a TBN of 10.5 mg KOH/g, a pour point of −36 °C and sulphated ash of 1 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C128 mm²/s114.44 mm²/s
Viscosity 100 °C15.6 mm²/s15.2 mm²/s
Viscosity index127 138
TBN10.5 mg KOH/g10.05 mg KOH/g
CCS −20 °Cnot stated
Pour point−36 °C−37 °C
Flash point225 °C230 °C
Densitynot stated
HTHS 150 °C4.3 mPa·s4.26 mPa·s
Sulphated ash1 %1 %

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7, E9 · API CK-4, CJ-4, CI-4, SN
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

John Deere Plus-50 II 15W-40 is a motor oil from John Deere, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.

The oil meets API CK-4, API CJ-4, API CI-4, API SN and more (6 in total). API CK-4 is the current American specification for truck and pickup diesel engines. API SN is an older American specification for petrol engines. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF.

Viscosity at 100 °C is 15.6 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.

Average values: HTHS 4.3 mPa·s is close to the class middle (median 4.3); TBN 10.5 mg KOH/g is close to the class middle (median 10.1); pour point −36 °C is close to the class middle (median −37).

Weaker values: viscosity index 127 is among the weakest in the class (median 138); flash point 225 °C is among the weakest in the class (median 232).

Limit values: HTHS 4.3 mPa·s meets the 3.7 mPa·s minimum required for this class; sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.