EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol 7703 O.E.M. 5W-30

Mannol 7703 O.E.M. 5W-30 is a 5W-30 engine oil (ACEA A5/B5, C2 · API SN, SM, CF). According to the manufacturer's data sheet it has a viscosity of 62.9 mm²/s at 40 °C, 11.02 mm²/s at 100 °C, a viscosity index of 170, a TBN of 7.32 mg KOH/g and a pour point of −42 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C62.9 mm²/s68.55 mm²/s
Viscosity 100 °C11.02 mm²/s11.7 mm²/s
Viscosity index170 168
TBN7.32 mg KOH/g10.2 mg KOH/g
CCS −30 °C5250 mPa·s5927 mPa·s
Pour point−42 °C−42 °C
Flash point222 °C225 °C
Density0.85 g/cm³0.852 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A5/B5 requires 2.9 to 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C2 allows at most 0.8 %.

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A5/B5, C2 · API SN, SM, CF
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Mannol 7703 O.E.M. 5W-30 is a motor oil from Mannol, viscosity grade 5W-30. In the database we compare it with 34 other oils in the 5W-30 class.

The oil meets API SN, API SM, API CF, ACEA A5/B5 and more (6 in total). API SN is an older American specification for petrol engines. ACEA A5/B5 is a fuel-economy specification with reduced HTHS for engines without a DPF. ACEA C2 is a low-ash oil with reduced HTHS (from 2.9 mPa·s) for DPF engines where the carmaker wants lower friction.

Viscosity at 100 °C is 11.02 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: viscosity index 170 is in the top quarter of the class (median 168).

Average values: CCS 5250 mPa·s is close to the class middle (median 5790); pour point −42 °C is close to the class middle (median −42).

Weaker values: TBN 7.3 mg KOH/g is among the weakest in the class (median 10.2); flash point 222 °C is among the weakest in the class (median 227).

Limit values: CCS 5250 mPa·s at −30 °C is 80 % of the SAE limit (6600 mPa·s).

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.