Valvoline SynPower FE 5W-30
Valvoline SynPower FE 5W-30 is a 5W-30 engine oil (ACEA A5/B5 · API SL, CF). According to the manufacturer's data sheet it has a viscosity of 55.44 mm²/s at 40 °C, 10 mm²/s at 100 °C, a viscosity index of 169, a TBN of 9.91 mg KOH/g and a pour point of −36 °C.
Data sheet ↗ Data verified: 8 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 55.44 mm²/s | 68.55 mm²/s |
| Viscosity 100 °C | 10 mm²/s | 11.7 mm²/s |
| Viscosity index | 169 | 168 |
| TBN | 9.91 mg KOH/g | 10.2 mg KOH/g |
| CCS −30 °C | 3800 mPa·s | 5927 mPa·s |
| Pour point | −36 °C | −42 °C |
| Flash point | 222 °C | 225 °C |
| Density | 0.852 g/cm³ | 0.852 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA A5/B5 requires 2.9 to 3.5 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A5/B5 allows at most 1.6 %. |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A5/B5 · API SL, CF
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- Elf Evolution 900 SXR 5W-30ACEA A5/B5 · API SL, CF
- Mobil Super 3000 x1 Formula FE 5W-30ACEA A5/B5 · API SL, SP
- Mannol 7703 O.E.M. 5W-30ACEA A5/B5, C2 · API SN, SM, CF
- Mannol 7707 O.E.M. 5W-30ACEA A5/B5 · API SN · ILSAC GF-4
- Motul Specific 913D 5W-30ACEA A5/B5
- Motul 8100 Eco-nergy 5W-30ACEA A5/B5 · API SP
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
Valvoline SynPower FE 5W-30 is a motor oil from Valvoline, viscosity grade 5W-30. In the database we compare it with 34 other oils in the 5W-30 class.
The oil meets ACEA A5/B5, API SL, API CF, JLR STJLR.03.5003 and more (6 in total). ACEA A5/B5 is a fuel-economy specification with reduced HTHS for engines without a DPF. Renault RN0700 and RN0710 are Renault/Dacia approvals for petrol and older diesel engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 10 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.
Strengths: CCS 3800 mPa·s is among the best 10 % in the class (median 5790).
Average values: viscosity index 169 is close to the class middle (median 168).
Weaker values: TBN 9.9 mg KOH/g is in the weaker half of the class (median 10.2); pour point −36 °C is among the weakest in the class (median −42); flash point 222 °C is among the weakest in the class (median 227).
Limit values: CCS 3800 mPa·s at −30 °C is 58 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.
Based on its values it suits everyday driving where fuel economy matters most and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.