EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mannol

Mannol 7707 O.E.M. 5W-30

Mannol 7707 O.E.M. 5W-30 is a 5W-30 engine oil (ACEA A5/B5 · API SN · ILSAC GF-4). According to the manufacturer's data sheet it has a viscosity of 66.4 mm²/s at 40 °C, 11.4 mm²/s at 100 °C, a viscosity index of 166, a TBN of 9.8 mg KOH/g and a pour point of −45 °C.

Data sheet ↗ Data verified: 8 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C66.4 mm²/s68.55 mm²/s
Viscosity 100 °C11.4 mm²/s11.7 mm²/s
Viscosity index166 168
TBN9.8 mg KOH/g10.2 mg KOH/g
CCS −30 °C4250 mPa·s5927 mPa·s
Pour point−45 °C−42 °C
Flash point224 °C225 °C
Density0.85 g/cm³0.852 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A5/B5 requires 2.9 to 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA A5/B5 allows at most 1.6 %.

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A5/B5 · API SN · ILSAC GF-4
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Mannol 7707 O.E.M. 5W-30 is a motor oil from Mannol, viscosity grade 5W-30. In the database we compare it with 34 other oils in the 5W-30 class.

The oil meets API SN, ACEA A5/B5, ILSAC GF-4, Ford WSS-M2C913-D and more (6 in total). API SN is an older American specification for petrol engines. ACEA A5/B5 is a fuel-economy specification with reduced HTHS for engines without a DPF. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 11.4 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: CCS 4250 mPa·s is among the best 10 % in the class (median 5790); pour point −45 °C is in the top quarter of the class (median −42).

Weaker values: viscosity index 166 is in the weaker half of the class (median 168); TBN 9.8 mg KOH/g is among the weakest in the class (median 10.2); flash point 224 °C is in the weaker half of the class (median 227).

Limit values: CCS 4250 mPa·s at −30 °C is 64 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.

Based on its values it suits harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.