Motorcraft 0W-20 Full Synthetic
Motorcraft 0W-20 Full Synthetic is a 0W-20 engine oil (API SQ · ILSAC GF-7A). According to the manufacturer's data sheet it has a viscosity of 46 mm²/s at 40 °C, 8.6 mm²/s at 100 °C and a viscosity index of 170.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 46 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.6 mm²/s | 8.4 mm²/s |
| Viscosity index | 170 | 169 |
| TBN | not stated | |
| CCS −35 °C | not statedThe manufacturer gives only kinematic viscosity at −35 °C (6,700 mm²/s), not CCS. | |
| Pour point | −42 °CThe manufacturer gives only a limit, "less than −42", not a measured value. | −42.5 °C |
| Flash point | 205 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 225 °C |
| Density | 0.846 g/cm³ | 0.845 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SQ · ILSAC GF-7A
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- Castrol EDGE 0W-20 (US)API SQ · ILSAC GF-7
- Pennzoil Platinum 0W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- Motorcraft 0W-20 Synthetic BlendAPI SN · ILSAC GF-5
- Pennzoil Platinum High Mileage 0W-20API SP · ILSAC GF-6A
- Havoline ProDS Full Synthetic 0W-20API SN
- Pennzoil Ultra Platinum 0W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
Motorcraft 0W-20 Full Synthetic is a motor oil from Ford, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SQ, ILSAC GF-7A, Ford WSS-M2C972-A1. API SQ is the latest American specification for petrol engines, introduced in 2025. ILSAC GF-7A is the latest US–Japanese specification for fuel-efficient petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.6 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 170 is close to the class middle (median 169).
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.