Pennzoil Platinum High Mileage 0W-20
Pennzoil Platinum High Mileage 0W-20 is a 0W-20 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 46.5 mm²/s at 40 °C, 8.5 mm²/s at 100 °C, a viscosity index of 160 and a pour point of −42 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 46.5 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.5 mm²/s | 8.4 mm²/s |
| Viscosity index | 160 | 169 |
| TBN | not stated | |
| CCS −35 °C | 5380 mPa·s | 5670 mPa·s |
| Pour point | −42 °C | −42.5 °C |
| Flash point | 205 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 225 °C |
| Density | 0.839 g/cm³ | 0.845 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- Motorcraft 0W-20 Synthetic BlendAPI SN · ILSAC GF-5
- Castrol EDGE 0W-20 (US)API SQ · ILSAC GF-7
- Pennzoil Platinum 0W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- Havoline ProDS Full Synthetic 0W-20API SN
- Motorcraft 0W-20 Full SyntheticAPI SQ · ILSAC GF-7A
- Quaker State Full Synthetic 0W-20API SP · ILSAC GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
Pennzoil Platinum High Mileage 0W-20 is a motor oil from Pennzoil, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SP, ILSAC GF-6A, Chrysler MS-6395, Ford WSS-M2C947-A and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.5 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Average values: CCS 5380 mPa·s is close to the class middle (median 5670).
Weaker values: viscosity index 160 is among the weakest in the class (median 169); pour point −42 °C is in the weaker half of the class (median −44).
Limit values: CCS 5380 mPa·s at −35 °C is 87 % of the SAE limit (6200 mPa·s).