Quaker State Full Synthetic 0W-20
Quaker State Full Synthetic 0W-20 is a 0W-20 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 44.61 mm²/s at 40 °C, 8.33 mm²/s at 100 °C, a viscosity index of 165 and a pour point of −52 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 44.61 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.33 mm²/s | 8.4 mm²/s |
| Viscosity index | 165 | 169 |
| TBN | not stated | |
| CCS −35 °C | 5040 mPa·s | 5670 mPa·s |
| Pour point | −52 °C | −42.5 °C |
| Flash point | 239 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 225 °C |
| Density | 0.834 g/cm³ | 0.845 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- Castrol GTX Ultraclean 0W-20API SQ · ILSAC GF-7
- Havoline ProDS Full Synthetic 0W-20API SN
- Castrol EDGE Extended Performance 0W-20ACEA C5, C6 · API SP · ILSAC GF-6A
- Performance Plus Full Synthetic dexos1 Gen3 0W-20API SP · ILSAC GF-6A
- Pennzoil Platinum High Mileage 0W-20API SP · ILSAC GF-6A
- Motorcraft 0W-20 Synthetic BlendAPI SN · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
Quaker State Full Synthetic 0W-20 is a motor oil from Quaker State, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SP, ILSAC GF-6A, GM dexos1 Gen2, Chrysler MS-6395 and more (6 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 8.33 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Strengths: CCS 5040 mPa·s is in the top quarter of the class (median 5670); pour point −52 °C is among the best 10 % in the class (median −44).
Weaker values: viscosity index 165 is in the weaker half of the class (median 169).
Limit values: CCS 5040 mPa·s at −35 °C is 81 % of the SAE limit (6200 mPa·s).