EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Red Line

Red Line 20W-50

Red Line 20W-50 is a 20W-50 engine oil (ACEA A3/B3 · API SN). According to the manufacturer's data sheet it has a viscosity of 148 mm²/s at 40 °C, 19.8 mm²/s at 100 °C, a viscosity index of 155, HTHS of 6.1 mPa·s and a pour point of −45 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 20W-50 i
Viscosity 40 °C148 mm²/s159 mm²/s
Viscosity 100 °C19.8 mm²/s19.8 mm²/s
Viscosity index155 140
TBNnot stated
CCS −15 °C5000 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s).5027 mPa·s
Pour point−45 °C−35 °C
Flash point234 °C224 °C
Densitynot stated
HTHS 150 °C6.1 mPa·s5.4 mPa·s
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B3 allows at most 1.5 %.
Noack volatility6 %

All 20W-50 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B3 · API SN
Oils by specification

Similar oils

Oils in the 20W-50 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 20W-50 class.

Red Line 20W-50 is a motor oil from Red Line, viscosity grade 20W-50. In the database we compare it with 9 other oils in the 20W-50 class.

The oil meets API SN, ACEA A3/B3. API SN is an older American specification for petrol engines. ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals.

Viscosity at 100 °C is 19.8 mm²/s, in the middle of the 16.3–21.9 mm²/s range for the summer grade 50.

Strengths: viscosity index 155 is in the top quarter of the class (median 140); HTHS 6.1 mPa·s is in the top quarter of the class (median 5.4); pour point −45 °C is in the top quarter of the class (median −36); flash point 234 °C is in the top quarter of the class (median 227).

Limit values: HTHS 6.1 mPa·s meets the 3.7 mPa·s minimum required for this class.

The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state TBN and sulphated ash, so we cannot compare it on these parameters.