EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Red Line

Red Line 5W-40

Red Line 5W-40 is a 5W-40 engine oil (ACEA A3/B3, A3/B4 · API SN). According to the manufacturer's data sheet it has a viscosity of 97 mm²/s at 40 °C, 15.6 mm²/s at 100 °C, a viscosity index of 174, HTHS of 4.4 mPa·s and a pour point of −45 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 i
Viscosity 40 °C97 mm²/s83 mm²/s
Viscosity 100 °C15.6 mm²/s13.65 mm²/s
Viscosity index174 168.5
TBNnot stated
CCS −30 °C5800 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s).6300 mPa·s
Pour point−45 °C−45 °C
Flash point232 °C225 °C
Densitynot stated
HTHS 150 °C4.4 mPa·s3.8 mPa·s
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B3 allows at most 1.5 %.
Noack volatility6 %

All 5W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B3, A3/B4 · API SN
Oils by specification

Similar oils

Oils in the 5W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.

Red Line 5W-40 is a motor oil from Red Line, viscosity grade 5W-40. In the database we compare it with 8 other oils in the 5W-40 class.

The oil meets API SN, ACEA A3/B3, ACEA A3/B4. API SN is an older American specification for petrol engines. ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s.

Viscosity at 100 °C is 15.6 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 174 is among the best 10 % in the class (median 168); HTHS 4.4 mPa·s is among the best 10 % in the class (median 3.8).

Average values: flash point 232 °C is close to the class middle (median 232).

Weaker values: pour point −45 °C is in the weaker half of the class (median −46).

Limit values: HTHS 4.4 mPa·s meets the 3.5 mPa·s minimum required for this class.

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state TBN and sulphated ash, so we cannot compare it on these parameters.