EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Shell

Shell Rotella T6 5W-40

Shell Rotella T6 5W-40 is a 5W-40 engine oil (ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2, MA, MA2). According to the manufacturer's data sheet it has a viscosity of 90 mm²/s at 40 °C, 14.9 mm²/s at 100 °C, a TBN of 10.2 mg KOH/g, a pour point of −51 °C and sulphated ash of 1 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 i
Viscosity 40 °C90 mm²/s83 mm²/s
Viscosity 100 °C14.9 mm²/s13.65 mm²/s
Viscosity indexnot stated
TBN10.2 mg KOH/g10.15 mg KOH/g
CCS −30 °C6300 mPa·s6300 mPa·s
Pour point−51 °C−45 °C
Flash point233 °C225 °C
Density0.846 g/cm³0.85 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA E9 requires at least 3.5 mPa·s.
Sulphated ash1 %1 %

All 5W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2, MA, MA2
Oils by specification

Similar oils

Oils in the 5W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.

Shell Rotella T6 5W-40 is a motor oil from Shell, viscosity grade 5W-40. In the database we compare it with 8 other oils in the 5W-40 class.

The oil meets API CK-4, API CJ-4, API CI-4, ACEA E9 and more (20 in total). API CK-4 is the current American specification for truck and pickup diesel engines. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. JASO MA2 means the oil is also suitable for motorcycles with a wet clutch. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 14.9 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: pour point −51 °C is among the best 10 % in the class (median −46); flash point 233 °C is in the top quarter of the class (median 232).

Average values: CCS 6300 mPa·s is close to the class middle (median 6300).

Limit values: CCS 6300 mPa·s at −30 °C is 95 % of the SAE limit (6600 mPa·s), leaving little cold-start reserve; sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.