Mobil Delvac 1 ESP 5W-40
Mobil Delvac 1 ESP 5W-40 is a 5W-40 engine oil (ACEA E7, E11 · API CK-4, CJ-4, CI-4, SN · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 84 mm²/s at 40 °C, 13.8 mm²/s at 100 °C, a viscosity index of 169, HTHS of 3.8 mPa·s, a TBN of 12 mg KOH/g, a pour point of −48 °C and sulphated ash of 1 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-40 i |
|---|---|---|
| Viscosity 40 °C | 84 mm²/s | 83 mm²/s |
| Viscosity 100 °C | 13.8 mm²/s | 13.65 mm²/s |
| Viscosity index | 169 | 168.5 |
| TBN | 12 mg KOH/g | 10.15 mg KOH/g |
| CCS −30 °C | 6510 mPa·s | 6300 mPa·s |
| Pour point | −48 °C | −45 °C |
| Flash point | 233 °C | 225 °C |
| Density | 0.852 g/cm³ | 0.85 g/cm³ |
| HTHS 150 °C | 3.8 mPa·s | 3.8 mPa·s |
| Sulphated ash | 1 % | 1 % |
All 5W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA E7, E11 · API CK-4, CJ-4, CI-4, SN · JASO DH-2
- Oils by specification
Similar oils
Oils in the 5W-40 class with the closest parameters and the same specification.
- Royal Purple Duralec Super 5W-40ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Schaeffer Supreme 9000 Full Synthetic 5W-40ACEA E7, E9 · API CJ-4, CI-4, SN · JASO DH-2
- Valvoline Advanced Full Synthetic HST 5W-40ACEA A3/B3, A3/B4 · API SN
- Valvoline Advanced Full Synthetic MST 5W-40ACEA C3 · API SN
- Red Line 5W-40ACEA A3/B3, A3/B4 · API SN
- Castrol EDGE 5W-40 A3/B4 (US)ACEA A3/B4 · API SP
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.
Mobil Delvac 1 ESP 5W-40 is a motor oil from Mobil, viscosity grade 5W-40. In the database we compare it with 8 other oils in the 5W-40 class.
The oil meets API CK-4, API CJ-4, API CI-4, API SN and more (12 in total). API CK-4 is the current American specification for truck and pickup diesel engines. API SN is an older American specification for petrol engines. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups.
Viscosity at 100 °C is 13.8 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.
Strengths: flash point 233 °C is in the top quarter of the class (median 232).
Average values: viscosity index 169 is close to the class middle (median 168); HTHS 3.8 mPa·s is close to the class middle (median 3.8); pour point −48 °C is close to the class middle (median −46).
Weaker values: CCS 6510 mPa·s is among the weakest in the class (median 6300).
Limit values: HTHS 3.8 mPa·s meets the 3.5 mPa·s minimum required for this class; CCS 6510 mPa·s at −30 °C is 99 % of the SAE limit (6600 mPa·s), leaving little cold-start reserve; sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.
Based on its values it suits truck and pickup diesel engines with a DPF. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state Noack volatility, so we cannot compare it on this parameter.