AMSOIL OE 5W-20
AMSOIL OE 5W-20 is a 5W-20 engine oil (ACEA A1/B1 · API SN PLUS · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 48.5 mm²/s at 40 °C, 8.6 mm²/s at 100 °C, a viscosity index of 158, HTHS of 2.8 mPa·s, a TBN of 8 mg KOH/g and a pour point of −44 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-20 i |
|---|---|---|
| Viscosity 40 °C | 48.5 mm²/s | 47.75 mm²/s |
| Viscosity 100 °C | 8.6 mm²/s | 8.4 mm²/s |
| Viscosity index | 158 | 157.5 |
| TBN | 8 mg KOH/g | 9.1 mg KOH/g |
| CCS −30 °C | 4310 mPa·s | 4397 mPa·s |
| Pour point | −44 °C | −42 °C |
| Flash point | 226 °C | 225 °C |
| Density | not stated | |
| HTHS 150 °C | 2.8 mPa·s | 2.7 mPa·s |
| Sulphated ash | not stated | |
| Noack volatility | 8.6 % |
All 5W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Oils by specification
Similar oils
Oils in the 5W-20 class with the closest parameters and the same specification.
- AMSOIL XL 5W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- Pennzoil Ultra Platinum 5W-20ACEA A1/B1 · API SN · ILSAC GF-5
- Royal Purple HPS 5W-20
- Kendall GT-1 Endurance 5W-20API SN · ILSAC GF-5
- Kendall GT-1 Full Synthetic 5W-20API SN · ILSAC GF-5
- Royal Purple HMX High Mileage 5W-20API SP
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.
AMSOIL OE 5W-20 is a motor oil from Amsoil, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.
The oil meets API SN PLUS, ILSAC GF-5, ACEA A1/B1, GM dexos1 Gen2 and more (7 in total). API SN PLUS is the American petrol-engine specification with added LSPI protection. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 8.6 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: HTHS 2.8 mPa·s is in the top quarter of the class (median 2.7).
Average values: viscosity index 158 is close to the class middle (median 158); CCS 4310 mPa·s is close to the class middle (median 4322); pour point −44 °C is close to the class middle (median −42).
Weaker values: TBN 8 mg KOH/g is among the weakest in the class (median 9.1); flash point 226 °C is in the weaker half of the class (median 228); Noack volatility 8.6 % is in the weaker half of the class (median 8.4).
Limit values: HTHS 2.8 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 4310 mPa·s at −30 °C is 65 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.
Based on its values it suits higher loads, towing or high-mileage engines and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state sulphated ash, so we cannot compare it on this parameter.