Kendall GT-1 Full Synthetic 5W-20
Kendall GT-1 Full Synthetic 5W-20 is a 5W-20 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 45.4 mm²/s at 40 °C, 8.4 mm²/s at 100 °C, a viscosity index of 164, HTHS of 2.6 mPa·s, a TBN of 8 mg KOH/g, a pour point of −41 °C and sulphated ash of 0.96 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-20 i |
|---|---|---|
| Viscosity 40 °C | 45.4 mm²/s | 47.75 mm²/s |
| Viscosity 100 °C | 8.4 mm²/s | 8.4 mm²/s |
| Viscosity index | 164 | 157.5 |
| TBN | 8 mg KOH/g | 9.1 mg KOH/g |
| CCS −30 °C | 6650 mPa·sCCS of 6,650 mPa·s at −30 °C in the data sheet is slightly above the SAE J300 limit for 5W (6,600). | 4397 mPa·s |
| Pour point | −41 °C | −42 °C |
| Flash point | 229 °C | 225 °C |
| Density | 0.848 g/cm³ | 0.85 g/cm³ |
| HTHS 150 °C | 2.6 mPa·s | 2.7 mPa·s |
| Sulphated ash | 0.96 % | 0.815 % |
All 5W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN · ILSAC GF-5
- Oils by specification
Similar oils
Oils in the 5W-20 class with the closest parameters and the same specification.
- Royal Purple HMX High Mileage 5W-20API SP
- Kendall GT-1 Endurance 5W-20API SN · ILSAC GF-5
- Royal Purple HPS 5W-20
- Royal Purple High Performance 5W-20API SQ · ILSAC GF-7A
- AMSOIL OE 5W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Valvoline Advanced Full Synthetic 5W-20API SN · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.
Kendall GT-1 Full Synthetic 5W-20 is a motor oil from Kendall, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.
The oil meets API SN, ILSAC GF-5, Chrysler MS-6395, Ford WSS-M2C945-A. API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.4 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Strengths: viscosity index 164 is in the top quarter of the class (median 158).
Average values: flash point 229 °C is close to the class middle (median 228).
Weaker values: HTHS 2.6 mPa·s is among the weakest in the class (median 2.7); TBN 8 mg KOH/g is among the weakest in the class (median 9.1); pour point −41 °C is in the weaker half of the class (median −42).
Limit values: HTHS 2.6 mPa·s meets the 2.6 mPa·s minimum required for this class; sulphated ash of 0.96 % is higher; the oil is not intended for engines with a DPF.
Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state Noack volatility, so we cannot compare it on this parameter.