Royal Purple HPS 5W-20
Royal Purple HPS 5W-20 is a 5W-20 engine oil (5W-20). According to the manufacturer's data sheet it has a viscosity of 43.9 mm²/s at 40 °C, 8.6 mm²/s at 100 °C, a viscosity index of 173, HTHS of 2.7 mPa·s, a TBN of 9.7 mg KOH/g and a pour point of −48 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-20 i |
|---|---|---|
| Viscosity 40 °C | 43.9 mm²/s | 47.75 mm²/s |
| Viscosity 100 °C | 8.6 mm²/s | 8.4 mm²/s |
| Viscosity index | 173 | 157.5 |
| TBN | 9.7 mg KOH/g | 9.1 mg KOH/g |
| CCS −30 °C | 4060 mPa·s | 4397 mPa·s |
| Pour point | −48 °C | −42 °C |
| Flash point | 216 °C | 225 °C |
| Density | not stated | |
| HTHS 150 °C | 2.7 mPa·s | 2.7 mPa·s |
| Sulphated ash | not stated |
All 5W-20 oils → See the class table for a detailed comparison with other oils.
Similar oils
Oils in the 5W-20 class with the closest parameters and the same specification.
- AMSOIL OE 5W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Kendall GT-1 Endurance 5W-20API SN · ILSAC GF-5
- Kendall GT-1 Full Synthetic 5W-20API SN · ILSAC GF-5
- Royal Purple HMX High Mileage 5W-20API SP
- AMSOIL XL 5W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- Royal Purple High Performance 5W-20API SQ · ILSAC GF-7A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.
Royal Purple HPS 5W-20 is a motor oil from Royal Purple, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.
The data sheet lists no specifications or carmaker approvals, so it only suits engines whose manual does not require a specific approval.
Viscosity at 100 °C is 8.6 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: viscosity index 173 is among the best 10 % in the class (median 158); pour point −48 °C is in the top quarter of the class (median −42).
Average values: HTHS 2.7 mPa·s is close to the class middle (median 2.7); TBN 9.7 mg KOH/g is close to the class middle (median 9.1); CCS 4060 mPa·s is close to the class middle (median 4322).
Weaker values: flash point 216 °C is among the weakest in the class (median 228).
Limit values: HTHS 2.7 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 4060 mPa·s at −30 °C is 62 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.
Based on its values it suits higher loads, towing or high-mileage engines and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.