Royal Purple HMX High Mileage 5W-20
Royal Purple HMX High Mileage 5W-20 is a 5W-20 engine oil (API SP). According to the manufacturer's data sheet it has a viscosity of 46.5 mm²/s at 40 °C, 8.4 mm²/s at 100 °C, a viscosity index of 158, HTHS of 2.6 mPa·s, a TBN of 8.9 mg KOH/g and a pour point of −45 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-20 i |
|---|---|---|
| Viscosity 40 °C | 46.5 mm²/s | 47.75 mm²/s |
| Viscosity 100 °C | 8.4 mm²/s | 8.4 mm²/s |
| Viscosity index | 158 | 157.5 |
| TBN | 8.9 mg KOH/g | 9.1 mg KOH/g |
| CCS −30 °C | 4100 mPa·s | 4397 mPa·s |
| Pour point | −45 °C | −42 °C |
| Flash point | 221 °C | 225 °C |
| Density | not stated | |
| HTHS 150 °C | 2.6 mPa·s | 2.7 mPa·s |
| Sulphated ash | not stated |
All 5W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP
- Oils by specification
Similar oils
Oils in the 5W-20 class with the closest parameters and the same specification.
- Kendall GT-1 Full Synthetic 5W-20API SN · ILSAC GF-5
- Kendall GT-1 Endurance 5W-20API SN · ILSAC GF-5
- Royal Purple HPS 5W-20
- Royal Purple High Performance 5W-20API SQ · ILSAC GF-7A
- AMSOIL OE 5W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Valvoline Advanced Full Synthetic 5W-20API SN · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.
Royal Purple HMX High Mileage 5W-20 is a motor oil from Royal Purple, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.
The oil meets API SP, Chrysler MS-6395, Ford WSS-M2C960-A1, Ford WSS-M2C945-A and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.4 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Strengths: pour point −45 °C is in the top quarter of the class (median −42).
Average values: viscosity index 158 is close to the class middle (median 158); TBN 8.9 mg KOH/g is close to the class middle (median 9.1); CCS 4100 mPa·s is close to the class middle (median 4322).
Weaker values: HTHS 2.6 mPa·s is among the weakest in the class (median 2.7); flash point 221 °C is in the weaker half of the class (median 228).
Limit values: HTHS 2.6 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 4100 mPa·s at −30 °C is 62 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.
Based on its values it suits harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.