EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Pennzoil

Pennzoil Platinum 5W-30

Pennzoil Platinum 5W-30 is a 5W-30 engine oil (ACEA A1/B1 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 53.9 mm²/s at 40 °C, 9.8 mm²/s at 100 °C, a viscosity index of 170 and a pour point of −48 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C53.9 mm²/s61.2 mm²/s
Viscosity 100 °C9.8 mm²/s10.7 mm²/s
Viscosity index170 166
TBNnot stated
CCS −30 °C4480 mPa·s4965 mPa·s
Pour point−48 °C−42 °C
Flash point207 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.230 °C
Density0.837 g/cm³0.851 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A1/B1 · API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Pennzoil Platinum 5W-30 is a motor oil from Pennzoil, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SP, ILSAC GF-6A, ACEA A1/B1, GM dexos1 Gen2 and more (7 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 9.8 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.

Strengths: viscosity index 170 is in the top quarter of the class (median 166); pour point −48 °C is among the best 10 % in the class (median −42).

Average values: CCS 4480 mPa·s is close to the class middle (median 4900).

Limit values: CCS 4480 mPa·s at −30 °C is 68 % of the SAE limit (6600 mPa·s), giving a large cold-start reserve.

Based on its values it suits everyday driving where fuel economy matters most and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.