EuropeUSA 915 oils in 35 classes + 188 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Amsoil

Amsoil Signature Series 10W-30

Amsoil Signature Series 10W-30 is a 10W-30 engine oil (API SQ, SP, SN Plus · ILSAC GF-7A, GF-6A, GF-5). According to the manufacturer's data sheet it has a viscosity of 67.6 mm²/s at 40 °C, 10.7 mm²/s at 100 °C, a viscosity index of 146, HTHS of 3.1 mPa·s, a TBN of 10.4 mg KOH/g and a pour point of −48 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °C67.6 mm²/s67.6 mm²/s
Viscosity 100 °C10.7 mm²/s10.9 mm²/s
Viscosity index146 147
TBN10.4 mg KOH/g9.45 mg KOH/g
CCS −25 °C3917 mPa·s4913 mPa·s
Pour point−48 °C−39 °C
Flash point234 °C226.5 °C
Densitynot stated
HTHS 150 °C3.1 mPa·s3.4 mPa·s
Sulphated ashnot stated
Noack volatility3.9 %

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SQ, SP, SN Plus · ILSAC GF-7A, GF-6A, GF-5
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

Amsoil Signature Series 10W-30 is a motor oil from Amsoil, viscosity grade 10W-30. In the database we compare it with 24 other oils in the 10W-30 class.

The oil meets API SQ, API SP, API SN, ILSAC GF-7A and more (11 in total). API SQ is the latest American specification for petrol engines, introduced in 2025. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). API SN is an older American specification for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 10.7 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: TBN 10.4 mg KOH/g is in the top quarter of the class (median 9.4); CCS 3917 mPa·s is in the top quarter of the class (median 4740); pour point −48 °C is among the best 10 % in the class (median −39); flash point 234 °C is in the top quarter of the class (median 228); Noack volatility 3.9 % is among the best 10 % in the class (median 7).

Average values: viscosity index 146 is close to the class middle (median 147).

Weaker values: HTHS 3.1 mPa·s is among the weakest in the class (median 3.4).

Limit values: HTHS 3.1 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 3917 mPa·s at −25 °C is 56 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve.

Based on its values it suits harsh winters with easy starting. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state sulphated ash, so we cannot compare it on this parameter.