EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Valvoline

Valvoline Advanced Full Synthetic 10W-30

Valvoline Advanced Full Synthetic 10W-30 is a 10W-30 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 66.8 mm²/s at 40 °C, 10.8 mm²/s at 100 °C, a viscosity index of 151, HTHS of 3.2 mPa·s, a TBN of 9.3 mg KOH/g and sulphated ash of 0.97 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °C66.8 mm²/s67.6 mm²/s
Viscosity 100 °C10.8 mm²/s10.9 mm²/s
Viscosity index151 148
TBN9.3 mg KOH/g9.3 mg KOH/g
CCS −25 °C6200 mPa·sThe manufacturer gives only a limit, "less than 6200", not a measured value.5000 mPa·s
Pour point−33 °CThe manufacturer gives only a limit, "at most −33", not a measured value.−39 °C
Flash pointnot stated
Densitynot stated
HTHS 150 °C3.2 mPa·s3.4 mPa·s
Sulphated ash0.97 %0.995 %
Noack volatility8 %

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SN · ILSAC GF-5
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

Valvoline Advanced Full Synthetic 10W-30 is a motor oil from Valvoline, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.

The oil meets API SN, ILSAC GF-5, Chrysler MS-6395. API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 10.8 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Average values: viscosity index 151 is close to the class middle (median 148); TBN 9.3 mg KOH/g is close to the class middle (median 9.3); Noack volatility 8 % is close to the class middle (median 8).

Weaker values: HTHS 3.2 mPa·s is among the weakest in the class (median 3.4).

Limit values: HTHS 3.2 mPa·s meets the 2.9 mPa·s minimum required for this class; sulphated ash of 0.97 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.