EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Royal Purple

Royal Purple High Performance 10W-30

Royal Purple High Performance 10W-30 is a 10W-30 engine oil (API SQ · ILSAC GF-7A). According to the manufacturer's data sheet it has a viscosity of 66.8 mm²/s at 40 °C, 10.9 mm²/s at 100 °C, a viscosity index of 154, HTHS of 3.2 mPa·s and a pour point of −39 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °C66.8 mm²/s67.6 mm²/s
Viscosity 100 °C10.9 mm²/s10.9 mm²/s
Viscosity index154 148
TBNnot stated
CCS −25 °C4188 mPa·s5000 mPa·s
Pour point−39 °C−39 °C
Flash point232 °C226 °C
Density0.85 g/cm³0.865 g/cm³
HTHS 150 °C3.2 mPa·s3.4 mPa·s
Sulphated ashnot stated

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SQ · ILSAC GF-7A
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

Royal Purple High Performance 10W-30 is a motor oil from Royal Purple, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.

The oil meets API SQ, ILSAC GF-7A, Chrysler MS-6395. API SQ is the latest American specification for petrol engines, introduced in 2025. ILSAC GF-7A is the latest US–Japanese specification for fuel-efficient petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 10.9 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: viscosity index 154 is in the top quarter of the class (median 148); CCS 4188 mPa·s is in the top quarter of the class (median 4783).

Average values: pour point −39 °C is close to the class middle (median −39); flash point 232 °C is close to the class middle (median 227).

Weaker values: HTHS 3.2 mPa·s is among the weakest in the class (median 3.4).

Limit values: HTHS 3.2 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 4188 mPa·s at −25 °C is 60 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve.

Based on its values it suits harsh winters with easy starting. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state TBN, Noack volatility and sulphated ash, so we cannot compare it on these parameters.