EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Amsoil

AMSOIL OE 10W-30

AMSOIL OE 10W-30 is a 10W-30 engine oil (ACEA A1/B1, A5/B5 · API SN PLUS · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 66.7 mm²/s at 40 °C, 10.7 mm²/s at 100 °C, a viscosity index of 151, HTHS of 3.4 mPa·s, a TBN of 8 mg KOH/g and a pour point of −44 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °C66.7 mm²/s67.6 mm²/s
Viscosity 100 °C10.7 mm²/s10.9 mm²/s
Viscosity index151 148
TBN8 mg KOH/g9.3 mg KOH/g
CCS −25 °C4636 mPa·s5000 mPa·s
Pour point−44 °C−39 °C
Flash point230 °C226 °C
Densitynot stated
HTHS 150 °C3.4 mPa·s3.4 mPa·s
Sulphated ashnot statedNot stated by the manufacturer. ACEA A5/B5 allows at most 1.6 %.
Noack volatility5.2 %

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A1/B1, A5/B5 · API SN PLUS · ILSAC GF-5
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

AMSOIL OE 10W-30 is a motor oil from Amsoil, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.

The oil meets API SN PLUS, ILSAC GF-5, ACEA A1/B1, ACEA A5/B5 and more (5 in total). API SN PLUS is the American petrol-engine specification with added LSPI protection. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 10.7 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: Noack volatility 5.2 % is in the top quarter of the class (median 8).

Average values: viscosity index 151 is close to the class middle (median 148); HTHS 3.4 mPa·s is close to the class middle (median 3.4); CCS 4636 mPa·s is close to the class middle (median 4783); pour point −44 °C is close to the class middle (median −39); flash point 230 °C is close to the class middle (median 227).

Weaker values: TBN 8 mg KOH/g is among the weakest in the class (median 9.3).

Limit values: HTHS 3.4 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 4636 mPa·s at −25 °C is 66 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve.

Based on its values it suits harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state sulphated ash, so we cannot compare it on this parameter.