EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · DuraMAX

DuraMAX Synthetic Gen 3 0W-20

DuraMAX Synthetic Gen 3 0W-20 is a 0W-20 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 43.7 mm²/s at 40 °C, 8.1 mm²/s at 100 °C, a viscosity index of 161, HTHS of 2.6 mPa·s, a TBN of 8 mg KOH/g and a pour point of −45 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C43.7 mm²/s44.145 mm²/s
Viscosity 100 °C8.1 mm²/s8.4 mm²/s
Viscosity index161 169
TBN8 mg KOH/g8 mg KOH/g
CCS −35 °C5500 mPa·s5670 mPa·s
Pour point−45 °C−42.5 °C
Flash point225 °C225 °C
Densitynot stated
HTHS 150 °C2.6 mPa·s2.67 mPa·s
Sulphated ashnot stated
Noack volatility11.1 %

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

DuraMAX Synthetic Gen 3 0W-20 is a motor oil from DuraMAX, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.

The oil meets API SP, ILSAC GF-6A, GM dexos1 Gen3, Ford WSS-M2C962-A1 and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 8.1 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.

Average values: TBN 8 mg KOH/g is close to the class middle (median 8); CCS 5500 mPa·s is close to the class middle (median 5670); pour point −45 °C is close to the class middle (median −44); Noack volatility 11.1 % is close to the class middle (median 11.8).

Weaker values: viscosity index 161 is among the weakest in the class (median 169); HTHS 2.6 mPa·s is in the weaker half of the class (median 2.7); flash point 225 °C is in the weaker half of the class (median 227).

Limit values: HTHS 2.6 mPa·s meets the 2.6 mPa·s minimum required for this class; CCS 5500 mPa·s at −35 °C is 89 % of the SAE limit (6200 mPa·s).

The data sheet does not state sulphated ash, so we cannot compare it on this parameter.