Havoline ProDS Full Synthetic 10W-30
Havoline ProDS Full Synthetic 10W-30 is a 10W-30 engine oil (API SN). According to the manufacturer's data sheet it has a viscosity of 62.3 mm²/s at 40 °C, 10.2 mm²/s at 100 °C, a viscosity index of 152 and a pour point of −33 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-30 i |
|---|---|---|
| Viscosity 40 °C | 62.3 mm²/s | 67.6 mm²/s |
| Viscosity 100 °C | 10.2 mm²/s | 10.9 mm²/s |
| Viscosity index | 152 | 148 |
| TBN | not stated | |
| CCS −25 °C | 3500 mPa·sThe data sheet labels CCS in poise, but the values correspond to mPa·s; we show them as mPa·s. | 5000 mPa·s |
| Pour point | −33 °C | −39 °C |
| Flash point | not stated | |
| Density | 0.85 g/cm³ | 0.865 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | not stated | |
| Noack volatility | 10 % |
All 10W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN
- Oils by specification
Similar oils
Oils in the 10W-30 class with the closest parameters and the same specification.
- Castrol GTX High Mileage 10W-30API SQ · ILSAC GF-7
- Castrol GTX 10W-30API SQ · ILSAC GF-7
- Valvoline VR1 Racing 10W-30
- CITGO Citgard 700 Synthetic Blend 10W-30API CK-4, CJ-4, CI-4
- Royal Purple Duralec Super 10W-30ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Kendall GT-1 Endurance 10W-30API SN · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.
Havoline ProDS Full Synthetic 10W-30 is a motor oil from Texaco, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.
The oil meets API SN. API SN is an older American specification for petrol engines.
Viscosity at 100 °C is 10.2 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.
Average values: viscosity index 152 is close to the class middle (median 148).
Weaker values: pour point −33 °C is among the weakest in the class (median −39); Noack volatility 10 % is in the weaker half of the class (median 8).
Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and sulphated ash, so we cannot compare it on these parameters.