Castrol GTX High Mileage 10W-30
Castrol GTX High Mileage 10W-30 is a 10W-30 engine oil (API SQ · ILSAC GF-7). According to the manufacturer's data sheet it has a viscosity of 66 mm²/s at 40 °C, 10.2 mm²/s at 100 °C, a viscosity index of 142, a pour point of −39 °C and sulphated ash of 0.83 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-30 i |
|---|---|---|
| Viscosity 40 °C | 66 mm²/s | 67.6 mm²/s |
| Viscosity 100 °C | 10.2 mm²/s | 10.9 mm²/s |
| Viscosity index | 142 | 148 |
| TBN | not stated | |
| CCS −25 °C | 4433 mPa·s | 5000 mPa·s |
| Pour point | −39 °C | −39 °C |
| Flash point | 206 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 226 °C |
| Density | 0.86 g/cm³ | 0.865 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | 0.83 % | 0.995 % |
All 10W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SQ · ILSAC GF-7
- Oils by specification
Similar oils
Oils in the 10W-30 class with the closest parameters and the same specification.
- Havoline ProDS Full Synthetic 10W-30API SN
- Castrol GTX 10W-30API SQ · ILSAC GF-7
- Valvoline VR1 Racing 10W-30
- CITGO Citgard 700 Synthetic Blend 10W-30API CK-4, CJ-4, CI-4
- Royal Purple Duralec Super 10W-30ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Kendall GT-1 Endurance 10W-30API SN · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.
Castrol GTX High Mileage 10W-30 is a motor oil from Castrol, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.
The oil meets API SQ, ILSAC GF-7, Chrysler MS-6395. API SQ is the latest American specification for petrol engines, introduced in 2025. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 10.2 mm²/s, near the lower end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thin side, which helps fuel economy.
Average values: CCS 4433 mPa·s is close to the class middle (median 4783); pour point −39 °C is close to the class middle (median −39).
Weaker values: viscosity index 142 is among the weakest in the class (median 148).
Limit values: CCS 4433 mPa·s at −25 °C is 63 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve; sulphated ash of 0.83 % is higher; the oil is not intended for engines with a DPF.
Based on its values it suits engines without a DPF, everyday driving where fuel economy matters most and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.